HP Cache Server Appliance Administrator Guide

124
Appendix A Traffic Manager Statistics
Queries Originating From ICP Peers
Query Messages
Received
The number of ICP query messages received from remote ICP peers (siblings
and parents).
Remote Query Hits The number of successful cache lookups in response to queries from ICP peers.
Remote Query Misses The number of unsuccessful cache lookups in response to queries from ICP
peers.
Successful Response
Messages Sent to Peers
The number of successful ICP messages written in response to ICP queries from
remote ICP peers.
WCCP 1.0 Router Statistics
Router's IP address The IP address of the WCCP router.
Router Status Indicates if the WCCP router is running (UP) or not (DOWN).
WCCP 1.0 Node Statistics
My IP address The IP address of this Traffic Server node.
Percentage of traffic
directed to this node
The percentage of port 80 traffic directed toward this Traffic Server node.
Number of heartbeats
received
The WCCP router sends a heartbeat message to this node every 10 seconds. A
heartbeat message is a short message that indicates to the recipient, “I am up
and running.” This value is the cumulative number of heartbeats received from
the router.
WCCP 1.0 Protocol Statistics
Enabled Indicates if WCCP is enabled on this node.
Leader's IP address The IP address of the leader node.
Number of active nodes The number of active nodes in the WCCP cache farm.
WCCP 2.0 Configuration Information
Security Enabled Indicates if WCCP security is enabled.
Multicast Enabled Indicates if multicast mode is enabled.
Multicast Address The IP multicast address (if multicast mode is enabled).
Multicast TTL The multicast Time To Live value specifies how many hops the router is from
the cache.
WCCP 2.0 Services Information
HTTP Indicates if transparent redirection of HTTP traffic is enabled.
NNTP Indicates if transparent redirection of NNTP traffic is enabled.
RTSP Indicates if transparent redirection of RTSP traffic is enabled (Media-IXT
option).
PNA Indicates if transparent redirection of PNA traffic is enabled (Media-IXT
option).
WCCP 2.0 HTTP Statistics
My IP The IP address of the Traffic Server receiving HTTP traffic from a WCCP
router.
Number of buckets
assigned to this node
The number of buckets assigned to this Traffic Server node by the WCCP
router.
Service Id The number that identifies the protocol in the router command. 0 is used for
HTTP.
Leader's IP The IP address of the leader node in the WCCP cache farm.
Statistic Description