HP StorageWorks Data Vault - User Guide

HP Data Vault User's Guide

The Front of the Server

Light Bar. There is one light bar for each internal SATA disk in the HP

Data Vault. The server can hold up to four disks.

Power Light. The power light is solid aqua white when the server is

turned on.

Network Connection Light. The network connection light is solid aqua

white when the server is connected to the network via a router or switch.

Health Light. The health light is solid aqua white when the server is

operating correctly.

USB Port. Plug up to four USB 2.0 or later disk drives into the USB

ports to expand your storage space. There is one USB port on the front

and three on the back of the server.

The Back of the Server

USB Port. Plug up to four USB 2.0 or later disk drives into the USB ports

to expand your storage space. There is one USB port on the front and

three on the back of the server.

eSATA Port. Plug an eSATA (external SATA) hard drive into the eSATA

port to expand your storage space.

Ethernet Port. Connect the HP Data Vault to your network using an

Ethernet cable.

Power Switch. Press to turn the HP Data Vault on.

Power Port. Plug the included AC power cord into the HP Data Vault.