6.5 HP StoreAll OS User Guide

2. Select Backup Target from the Select Type menu. You need at least one backup target listed
on the Object Store configuration, but this must be the same backup target proxy IP that is
used when setting the Sync-To key in the next section.
3. Provide the proxy IP address for the Object Store designated as the backup target in the
FQDN/IP address text box. Then, click Add.
To find the target proxy IP address, run the following command at the target site:
ibrix_objectstore -l
The proxy IP address for the Object Store can be found under Proxy IP column, as shown in
the following output:
4. Repeat steps 2 and 3 on the target Object Store configuration. You must add all of the proxy
IP’s from the source Object Store as Backup Sources in the target container sync configuration.
You can also perform these steps using the CLI:
• Example command, set up the source server:
[root@ib48-205]# ibrix_objectstoreadmin -a -p 10.2.11.10
Command succeeded!
152 Using Object Store