5.5 HP StorageWorks X9720 Network Storage System Administrator Guide (AW549-96026, March 2011)
Required tools
The following tools might be necessary for some procedures:
• T-10 Torx screwdriver
• T-15 Torx screwdriver
• 4-mm flat-blade screwdriver
• Phillips screwdriver
Additional documentation
The information in this section pertains to the specifics of the X9720 Network Storage System. For
detailed component replacement instructions, see the following documentation at http://www.hp.com/
support/manuals:
• c7000 blade enclosure
• HP BladeSystem c7000 Enclosure Maintenance and Ser vice Guide
• HP BladeSystem c-Class Enclosure Troubleshooting Guide
• Server blades
• HP ProLiant BL460c Server Blade Maintenance and Service Guide
• X9700c
• HP StorageWorks ExDS9100c/X9720 Storage System Controller Cache Module Customer
Self Repair Instructions
• HP StorageWorks ExDS9100c/X9720 Storage System Controller Battery Customer Self Repair
Instructions
• HP StorageWorks ExDS9100c/X9720 Storage System Controller Customer Self Repair Instruc-
tions
• HP StorageWorks 3 SAS BL Switch Installation Instructions
• HP StorageWorks 3 SAS BL Switch Customer Self Repair Instructions
• X9700cx
• HP StorageWorks 600 Modular Disk System Maintenance and Service Guide
Replacing the c7000 blade enclosure and server blade parts
NOTE:
This section contains information and procedures specific to the X9720 Network Storage System. For
complete instructions on the topics in this section, see the
HP BladeSystem c7000 Enclosure Maintenance
and Service Guide
.
Replacing the blade enclosure
1. Power off the blade enclosure.
X9720 Network Storage System Administrator Guide 133