5.5 HP StorageWorks X9720 Network Storage System Administrator Guide (AW549-96026, March 2011)

7. The Configuration Wizard starts automatically. Use the appropriate configuration procedure:
• To configure a file serving node, select one of the following:
• When your cluster was configured initially, the installer may have created a template for
configuring file serving nodes. To use this template to configure the file serving node un-
dergoing recovery, go to “Configuring a file serving node using the original tem-
plate” on page 147.
• To configure the file serving node manually, without the template, go to “Configuring a
file serving node manually” on page 151.
• To configure the dedicated Management Server blade, go to Configuring the management
console on the dedicated (non-agile) Management Server blade, page 161. This procedure is
intended for systems that are not using the agile management console configuration, and in-
stead, the standard management console is configured on the Management Server blade.
NOTE:
You will need your latest fmbackup.zip file to restore the cluster configuration on the
Management Server blade. (See Backing up the management console configuration, page
49 for more information.) If you do not have an fmbackup.zip file, full recovery may not
be possible.
Configuring a file serving node
Configuring a file serving node using the original template
Complete the following steps:
1. Log into the system as user root (the default password is hpinvent).
2. When the System Deployment Menu appears, select Join an existing cluster.
3. The Configuration Wizard attempts to discover management consoles on the network and then
displays the results. Select the appropriate management console for this cluster.
X9720 Network Storage System Administrator Guide 147