5.5 HP StorageWorks X9720 Network Storage System Administrator Guide (AW549-96026, March 2011)

If you have configured a user network, enter a VIF IP address and netmask.
If you configured a passive management console, enter the following command to verify the
status of the console:
ibrix_fm -i
Next, complete the restore on the file serving node.
Completing the restore on a file serving node
1. Ensure that you have root access to the node. The restore process sets the root password to
hpinvent, the factory default.
2. Run the exds_stdiag command on the node. You should be able to see the shared storage,
just as you can from the other server blades in the chassis.
3. Disable the following services by running the chkconfig <service> off command, replacing
<service> with each of the following services in turn:
• configd
• cpuspeed
• microcode_ctl
• mxso_db_upgrade
• mxso_netif_check
• mxso_scan
• mxso_scan_luns
• z_mxso_upgrade
Recovering the X9720 Network Storage System150