5.5 HP StorageWorks X9720 Network Storage System Administrator Guide (AW549-96026, March 2011)

15. When you have completed your entries on the File Serving Node Configuration Menu, select
Continue.
16. Verify your entries on the confirmation screen, and select Commit to apply the values to the file
serving node and register it with the management console.
17. If the hostname specified for the node already exists in the cluster (the name was used by the
node you are replacing), the Replace Existing Server window asks whether you want to replace
the existing server with the node you are configuring. When you click Yes, the replacement node
will be registered.
18. After the server is registered, you will be asked whether you want to configure a passive agile
management console on the node. If the node being restored previously hosted the agile man-
agement console, install the passive management console.
IMPORTANT:
Configure a passive agile management console only if the agile management console is enabled
and an active agile management console is configured.
If you configured a user network, enter a VIF IP address and netmask for the network.
Recovering the X9720 Network Storage System160