6.5 HP StoreAll 8200/9300 Storage Administrator Guide

To see similar information for completed sessions, select NDMP Backup > Session History.
To view or cancel sessions from the CLI, see the ibrix_ndmpsession command in the HP StoreAll
OS CLI Reference Guide.
Starting, stopping, or restarting an NDMP Server
When a node is booted, the NDMP Server is started automatically. If necessary, you can use the
following command to start, stop, or restart the NDMP Server on one or more file serving nodes:
ibrix_server -s -t ndmp -c { start | stop | restart} [-h SERVERNAMES]
Viewing or rescanning tape and media changer devices
To view the tape and media changer devices currently configured for backups, select Cluster
Configuration from the Navigator, and then select NDMP Backup > Tape Devices.
The following information is listed for each device:
DescriptionField
A node that can access the device.Hostname
The type of device (tape, media changer).Device Type
The ID of the device.Device ID
The OS device node associated with the device.Device Node
If you add a tape or media changer device to the SAN, click Rescan Device to update the list. If
you remove a device and want to delete it from the list, reboot all of the servers to which the device
is attached.
To view or rescan devices using the CLI, see the ibrix_tape command in the HP StoreAll OS
CLI Reference Guide.
Using NDMP backup applications 69