6.5 HP StoreAll OS CLI Reference Guide
Table Of Contents
- HP StoreAll OS CLI Reference Guide
- Contents
- 1 General CLI information
- 2 StoreAll commands
- ibrix_activedirectory
- ibrix_archiving
- ibrix_audit_reports
- ibrix_auth
- ibrix_av
- ibrix_avconfig
- ibrix_avquarantine
- ibrix_avscan
- ibrix_caseinsensitive
- ibrix_certificate
- ibrix_chassis
- ibrix_cifs
- ibrix_cifsconfig
- ibrix_cifsmonitor
- ibrix_cifsperms
- ibrix_client
- ibrix_cluster
- ibrix_clusterconfig
- ibrix_collect
- ibrix_crr
- ibrix_crreq
- ibrix_crr_export
- ibrix_crrhealth
- ibrix_crr_nic
- ibrix_datavalidation
- ibrix_dbck
- ibrix_df
- ibrix_edquota
- ibrix_evacuate
- ibrix_event
- ibrix_exportfs
- ibrix_fm
- ibrix_fm_tune
- ibrix_fs
- Description
- Synopsis
- Create a file system
- View information about file systems
- Extend a file system
- Audit log expiration policy
- Archiving/auditing synchronizer (Retention Expiration and Autocommit)
- Delete a file system
- Migrate segment ownership
- Enable or disable quotas
- Enable, disable, or display Express Query and auditing settings
- Mark a bad segment
- Enable or disable Export Control
- Assign or delete a standby server for the specified segments
- Options
- See also
- ibrix_fs_ops
- ibrix_fs_tune
- ibrix_fsck
- ibrix_ftpconfig
- ibrix_ftpshare
- ibrix_haconfig
- ibrix_hba
- ibrix_health
- ibrix_healthconfig
- ibrix_host_tune
- ibrix_hostgroup
- ibrix_hostpower
- ibrix_httpconfig
- ibrix_httpshare
- ibrix_httpvhost
- ibrix_idmapping
- ibrix_ldapconfig
- ibrix_ldapidmapping
- ibrix_license
- ibrix_localgroups
- ibrix_localusers
- ibrix_lookup
- ibrix_lv
- ibrix_lwhost
- ibrix_lwmount
- ibrix_lwumount
- ibrix_migrator
- ibrix_mount
- ibrix_mountpoint
- ibrix_ndmpconfig
- ibrix_ndmpsession
- ibrix_nic
- ibrix_objectstore
- ibrix_objectstoreadmin
- ibrix_objectstoremonitor
- ibrix_onlinequotacheck
- ibrix_phonehome
- ibrix_powersrc
- ibrix_profile
- ibrix_pv
- ibrix_rebalance
- ibrix_reports
- ibrix_reten_adm
- ibrix_server
- ibrix_snap
- ibrix_snapreclamation
- ibrix_snmpagent
- ibrix_snmpgroup
- ibrix_snmptrap
- ibrix_snmpuser
- ibrix_snmpview
- ibrix_stats
- ibrix_tape
- ibrix_task
- ibrix_tier
- ibrix_top
- ibrix_umount
- ibrix_usernamemapping
- ibrix_version
- ibrix_vg
- ibrix_vs
- ibrix_vs_snap
- ibrix_vs_snap_strategy
- MDexport
- MDimport
- upgrade60.sh
- verify_client_update
- 3 Support and other resources
- 4 Documentation feedback
- Glossary
- Index
ibrix_ndmpconfig
Configures NDMP parameters on the cluster.
Description
The ibrix_ndmpconfig command sets NDMP parameters on the cluster. These parameters
control communications between the DMA and the NDMP Servers hosted on the file serving nodes.
Synopsis
Set NDMP parameters:
ibrix_ndmpconfig -c [-d IP1,IP2,IP3,...] [-m MINPORT] [-x MAXPORT] [-n
LISTENPORT] [-u USERNAME] [-p PASSWORD] [-e {0=disable,1=enable}] [-v
{0-10}] [-w BYTES] [-z NUMSESSIONS]
Display the current value of all configurable parameters:
ibrix_ndmpconfig -i
Synchronize the current parameter values to all file serving nodes:
ibrix_ndmpconfig -s
Options
DescriptionOption
Sets NDMP configuration parameters.-c
Specifies IP addresses that can be used by a DMA to access the cluster.-d
Enables or disables new NDMP sessions.-e
Displays the current value of all NDMP configurable parameters.-i
Sets the minimum NDMP data transfer socket port. The default is 49,152, and the
minimum allowed value is 1,024.
-m MINPORT
Sets the NDMP listener socket port. The default port is 10,000, and the minimum allowed
value is 1,024.
-n LISTENPORT
Sets the NDMP user password.-p PASSWORD
Synchronizes the current parameter values to all file serving nodes.-s
Sets the NDMP user name.-u USERNAME
Sets the NDMP trace log level. This value should be set to 0, the default. The level should
be increased only under the direction of HP Support.
-v
Sets the TCP window size for NDMP data transfer. This value should be changed only
for performance reasons. The default value is 160,000.
-w BYTES
Sets the maximum NDMP data transfer socket port. The default value is 65,535. This is
also the maximum allowed value.
-x MAXPORT
Sets the maximum number of concurrent sessions per NDMP server. The default value is
128.
-z NUMSESSIONS
Shows the usage for this command.-?
ibrix_ndmpconfig 147