6.5 HP StoreAll OS CLI Reference Guide

DescriptionOption
Specifies one or more hosts from which the data will be collected, for example: -h
HOST1,HOST2,HOST3
-h HOST1,HOST2,HOST3
Lists the ibrix_collect configuration information.-i
Lists the details of all data collections.-l
Enables or disables sending the cluster configuration by email at the end of collection.-m YES/NO
Specifies the name of a data collection.-n NAME
Specifies the number of data sets to be retained on the cluster nodes.-r NUMBER
Specifies the SMTP server to which the cluster configuration will be sent.-s SMTPSERVER
Specifies the email IDs to which the cluster configuration will be sent.-t TO
Shows details about a data collection.-v
Shows the usage for this command.-?
Obtaining custom logging from ibrix_collect add-on scripts
You can create add-on scripts that capture custom StoreAll and operating system commands and
logs. To activate an add-on script, place it in the specified location, and the add-on script will run
when the ibrix_collect command is executed. Output of these add-on scripts is packaged
into IbrixCollect tar files.
Table 1 ibrix_collect add-on scripts
Where to find more information?DescriptionStep
“Creating an add-on script” (page 44)Create an add-on script.1
“Running an add-on script” (page 45)Run the add-on script.2
“Viewing the output from an add-on script”
(page 46)
View the output from the add-on script.3
Creating an add-on script
To create an add-on script:
44 StoreAll commands