6.5 HP StoreAll OS CLI Reference Guide

Table Of Contents
Disable 32-bit compatibility mode:
ibrix_fs_tune -c -d -f FSNAME
Options
DescriptionOption
Specifies the number of KB that StoreAll software pre-fetches under NFS. The default
value is 128 KB.
-N NFS readahead
Sets one or more allocation policy tuning options.-O
Sets the number of KB a file system pre-allocates to a file. Default: 256 KB.-P prealloc
Sets allocation policy for directory segments only.-R
Specifies a segment.-S SEGMENT_NUMBER
Specifies a list of segments to prefer, prefers all segments, or restricts clients to using
segments local to the file serving nodes listed in the command. ALL and LOCAL are
keywords.
-S SEGNUMLIST| ALL|LOCAL
Identifies the first segment to which an allocation policy is applied in a file system.-S STARTSEGNUM
Resets an allocation policy.-U
Disables 32-bit compatibility mode.-d
Enables 32-bit compatibility mode.-e
A file system.-f FSNAME
A list of host groups.-g GROUPLIST
A list of one or more file serving nodes or StoreAll clients-h HOSTLIST
Lists allocation policies for users, groups, or file systems.-l u|g|f
Sets allocation policy on a file system and optionally on a list of hosts or groups.
Policy type names are case-sensitive and must be entered as shown: ROUNDROBIN,
STICKY, DIRECTORY, LOCAL, RANDOM, NONE, HOST_ROUNDROBIN_NB.
-p POLICY
Specifies the number of KB that StoreAll software will pre-fetch. The default value is
128 KB.
-r readahead
A list of one or more logical volume names (segments).-s LVNAME or LVNAMELIST
A tier on a file system.-t TIERNAME
Shows the usage for this command.-?
See also
ibrix_fs, ibrix_hostgroup
90 StoreAll commands