6.5 HP StoreAll OS CLI Reference Guide

Table Of Contents
The command can be run on file system FSNAME or optionally only on segment LVNAME. This
phase can be run with a specified block size and an alternate superblock number. For example:
ibrix_fsck -p 1 -f ifs1 -B 4096 -b 12250
NOTE: If phase 1 is run in analytic mode on a mounted file system, false errors can be reported.
Run phase 2:
ibrix_fsck -p 2 -f FSNAME [-s LVNAME] [-c] [-o "options"]
The command can be run on the specified file system or optionally only on segment LVNAME. Use
-o to specify any options.
Run phase 3:
ibrix_fsck -p 3 -f FSNAME [-c]
Switch a segment from unavailable to read-only, or from read-only to unavailable:
ibrix_fsck -w -f FSNAME -s LVNAME {-r | -u}
Options
DescriptionOption
Specifies a block size in KB.-B BLOCKSIZE
Clears the INFSCK flag.-C
Specifies the number of an alternate superblock, generally used only if the normal superblock
is corrupted.
-b ALTSUPERBLOCK
Runs ibrix_fsck in corrective mode (the default is analytical mode).-c
A file system.-f FSNAME
Options for the command.-o "options"
Runs the specified phase (0, 1, 2, or 3).-p 0|1|2|3
Specifies a logical volume (segment) name.-s LVNAME
Switches a segment from unavailable to read-only, or from read-only to unavailable.-w
Shows the usage for this command.-?
See also
ibrix_umount
92 StoreAll commands