6.0 HP X9320 Network Storage System Administrator Guide (AW542-96009, December 2011)

13. To complete the bond0 configuration, enter a space to select the Cluster Network role. Then
enter the IP address and netmask information that the network will use.
Repeat this procedure to create a bonded user network (typically bond1 with eth1 and eth2)
and any custom networks as required.
14. When you have completed your entries on the File Serving Node Configuration Menu, select
Continue.
15. Verify your entries on the confirmation screen, and select Commit to apply the values to the
file serving node and register it with the management console.
116 Recovering a file serving node