6.0 HP X9320 Network Storage System Administrator Guide (AW542-96009, December 2011)

x109s3 172.16.3.3
Command succeeded!
3. Uninstall the management console from the Management Server machine:
/ibrix/ibrixinit -tm -U
4. Verify that the uninstalled management console is no longer registered. Run the following
command from the file serving node hosting the newly active management console:
ibrix_fm -f
The command should now report only the agile management console on the file serving node.
[root@x109s3 ibrix]# ibrix_fm -f
NAME IP ADDRESS
------ ----------
x109s3 172.16.3.3
Command succeeded!
5. Remove the Management Server machine from the cluster database. Run the following command
from the file serving node hosting the newly active management console:
ibrix_server -d -h HOSTNAME
For example:
[root@x109s3 ibrix]# ibrix_server -d -h x109s1
6. To provide high availability for the management console, install a passive agile management
console on another file serving node. In the command, the -F option forces the overwrite of
the new_lvm2_uuid file that was installed with the X9000 Software.
/ibrix/ibrixinit -tm -C <local_cluster_interface_device> v
<cluster_VIF_IP> -m <cluster_netmask> -d <cluster_VIF_device> -w
9009 M passive -F
For example:
[root@x109s5 ibrix]# ./ibrixinit -tm -C bond0 -v 172.16.3.3 -m 255.255.248.0
-d bond0 -V 10.30.83.3 -N 255.255.0.0 -D bond1:0 -w 9009 -M passive -F
7. Verify that the newly installed agile management console is in passive mode:
ibrix_fm -i
For example:
[root@x109s5 ibrix]# ibrix_fm -i
FusionServer: x109s3 (passive, quorum is running)
=============================
Command succeeded
You can now physically remove the Management Server machine from the cluster.
Removing the dedicated Management Server 81