6.0 HP X9320 Network Storage System Administrator Guide (AW542-96009, December 2011)

Performing the upgrade
Complete the following steps on each node:
1. Obtain the latest HP X9000 Quick Restore DVD version 6.0 ISO image from the HP kiosk at
http://www.software.hp.com/kiosk (you will need your HP-provided login credentials).
2. Burn the ISO image to a DVD.
3. Insert the Quick Restore DVD into the server DVD-ROM drive.
4. Restart the server to boot from the drive.
5. When the following screen appears, enter qr to install the X9000 software on the file serving
node.
The server reboots automatically after the software is installed. Remove the DVD from the
DVD-ROM drive.
Restoring the node configuration
Complete the following steps on each node, starting with the previous active management console
node:
1. Log in to the node. The configuration wizard should pop up. Escape out of the configuration
wizard.
2. Attach the external storage media containing the saved node configuration information.
3. Restore the configuration. Run the following restore script and pass in the tgz file containing
the node's saved configuration information as an argument:
/usr/local/ibrix/setup/restore <saved_config.tgz>
4. Reboot the node.
Completing the upgrade
Complete the following steps:
Offline upgrades for X9000 Software 5.5.x to 6.0 89