6.0 HP X9320 Network Storage System Administrator Guide (AW542-96009, December 2011)

To specify more than one collection to be deleted at a time from the CLI, provide the names
separated by a semicolon.
To delete all data collections manually from the CLI, use the following command:
ibrix_collect –F
Configuring Ibrix Collect
You can configure data collection to occur automatically upon a system crash. This collection will
include additional crash digester output. The archive filename of the system crash-triggered collection
will be in the format <timestamp>_crash_<crashedNodeName>.zip.
1. To enable or disable an automatic collection of data after a system crash, and to configure
the number of data sets to be retained:
a. Select Cluster Configuration, and then select Ibrix Collect.
b. Click Modify, and the following dialog box will appear.
c. Under General Settings, enable or disable automatic collection by checking or unchecking
the appropriate box.
d. Enter the number of data sets to be retained in the cluster in the text box.
To enable/disable automatic data collection using the CLI, use the following command:
ibrix_collect –C –a <Yes\No>
To set the number of data sets to be retained in the cluster using the CLI, use the following
command:
ibrix_collect -C -r NUMBER
2. To configure emails containing a summary of collected information of each node to be sent
automatically to your desktop after every data collection event:
a. Select Cluster Configuration, and then select Ibrix Collect.
b. Click Modify.
c. Under Email Settings, enable or disable sending cluster configuration by email by checking
or unchecking the appropriate box.
d. Fill in the remaining required fields for the cluster configuration and click Okay.
To set up email settings to send cluster configurations using the CLI, use the following command:
98 Troubleshooting