6.1.4 HP IBRIX X9000 Storage Release Notes

Enhancements
This section provides information about enhancements added to a release.
Enhancements in the 6.1.3 release
The 6.1.3 release provides the option, -l, for placing log files in an alternative location for the
ibrix_fsck -p 1 and ibrix_fsck -p 2 commands. Use the -l option to prevent the root file
system from running out of space. For example:
ibrix_fsck -p 1 -l /home/user/
ibrix_fsck -p 2 -l /home/user/
In these examples, /home/user/ is the alternative location.
Enhancements in the 6.1.1 release
The 6.1.1 release includes the new HP IBRIX X9730 Network Storage System. This system replaces
the X9720 system and includes new storage array controller hardware, 3TB HDD support, simplified
installation, and diagnostics.
For X9320 systems, the 10GbE version now has two cards providing four network connections at 10
GbE.
The following software features are new in this release:
• New GUI wizards to configure user authentication and file shares.
• New installation wizards.
• Block snapshots are now supported on 3PAR Fiber Channel storage.
• Monitoring of chassis, storage, and server components on X9720/X9730 systems. You can
display component status on the GUI or with the ibrix_chassis, ibrix_pv, and
ibrix_health commands.
• Support for Antivirus software.
• New ibrix_evacuate command to move data from one segment to another. This feature was
previously provided with the ibrix_rebalance command.
• New upgrade60.sh utility to upgrade pre-6.0 file systems for software snapshots.
• CIFS enhancements:
LDAP can now be used as the primary authentication method for users accessing CIFS shares.
LDAP can be configured with the GUI or the ibrix_ldapconfig command.
◦
◦ LDAP ID mapping can now be used as a secondary lookup method to Active Directory for
users accessing CIFS shares. LDAP ID mapping can be configured with the GUI or the
ibrix_ldapidmapping command.
Enhancements 5