5.6.4 HP StoreAll Storage Release Notes (AW549-96075, June 2013)

4. Configure Entitlements.
5. Test the configuration.
The following sections describe each step in detail.
Configure SNMP on the file serving nodes
Run the /sbin/hpsnmpconfig script, which configures SNMP to integrate the CMS/IRSS running
on the Windows server with the HP System Management Homepage on the file serving node. The
script edits the /etc/snmp/snmpd.conf file, adding entries similar to the following:
# Following entries were added by HP Insight Management Agents at
# <date> <time> UTC <year>
dlmod cmaX /usr/lib64/libcmaX64.so
rwcommunity public 127.0.0.1
rocommunity public 127.0.0.1
rwcommunity public <Manager IP>
rocommunity public <Manager IP>
trapcommunity public
trapsink <Manager IP> public
syscontact
syslocation
# ---------------------- END --------------------
To enter more than one SNMP Manager IP, add the following lines in the snmp.conf file:
rwcommunity public <Manager IP>
rocommunity public <Manager IP>
trapsink <Manager IP> public
For <Manager IP>, enter CMS/IRSS or any other SNMP manager IP.
After updating the snmp.conf file, restart the snmpd service:
# service snmpd restart
For more information about the /sbin/hpsnmpconfig script, see “SNMP Configuration” in the
hp-snmp-agents(4) man page. For information about the HP System Management Homepage,
see:
http://h18013.www1.hp.com/products/servers/management/agents/index.html
IMPORTANT: The /opt/hp/hp-snmp-agents/cma.conf file controls certain actions of the
SNMP agents. You can add a trapIf entry to the file to configure the IP address used by the SNMP
daemon when sending traps. For example, to send traps using the IP address of the eth1 interface,
add the following:
trapIf eth1
Then restart the HP SNMP agents:
service hp-snmp-agents restart
For more information about the cma.conf file, see Section 3.1 of the Managing ProLiant servers with
Linux HOWTO at Managing ProLiant servers with Linux HOWTO .
Start or restart Insight Remote Support services
Start or restart the following services:
• System Management Homepage:
# service hpsmhd restart
• SNMP Agent:
# service snmpd restart
• HP SNMP Agents:
# service hp-snmp-agents start
Configuring HP Insight Remote Support 11