6.3 HP StoreAll Storage Release Notes (TA768-96086, April 2013)

1. Enter the following CLI command:
ibrix_event -p [-o DAYS_COUNT]
If you want to change the number of days the event database is purged, include the -o
DAYS_COUNT option when you enter the command.
Events are removed starting with the oldest events. The default is to remove the oldest seven
days of messages. Purge the event database periodically to prevent it from becoming too
large.
2. After the events are purged, create a new FM Store archive by entering the following
command:
ibrix_fm -B
3. Wait for a few seconds to let the Store archive propagate through the cluster and then restart
the active FM.
• The credentials management service (hpsp_credmgmt) will not allow adding a credential for a
new MSA storage array after the credential database is created. The workaround is to install the
credentials manually.
To install the credentials manually:
1. Enter the hpsp_couplet_info -i command to get a list of UUID for attached MSA
enclosures. Each enclosure is on a separate line, as shown in the following example of the
command and its output:
[root@ib25-02s1 security]# hpsp_couplet_info -i
500c0ff1390c0000
2. Install the credentials for a single MSA by running the following four commands once for
each MSA that the hpsp_couplet_info command lists in step 1. Replace
<MSA_SAS_BASE_ADDRESS> with one of the UUIDs as provided by the output of the
hpsp_couplet_info command.
hpsp_credmgmt --update-cred -s
couplet:couplet/array/<MSA_SAS_BASE_ADDRESS>/mgmtport_a/rw
--cred-type upwpair --cred-username manage --cred-password '!manage'
hpsp_credmgmt --update-cred -s
couplet:couplet/array/<MSA_SAS_BASE_ADDRESS>/mgmtport_a/ro
--cred-type upwpair --cred-username monitor --cred-password
'!monitor'
hpsp_credmgmt --update-cred -s
couplet:couplet/array/<MSA_SAS_BASE_ADDRESS>/mgmtport_b/rw
--cred-type upwpair --cred-username manage --cred-password '!manage'
hpsp_credmgmt --update-cred -s
couplet:couplet/array/<MSA_SAS_BASE_ADDRESS>/mgmtport_b/ro
--cred-type upwpair --cred-username monitor --cred-password
'!monitor'
12 Workarounds