HP StorageWorks X9720 Network Storage System Server Blade Installation Instructions (AW549-96009, December 2009)

HP StorageWorks X9720

Network Storage System

Server Blade Installation

Instructions

First edition: December 2009

The information in this document is subject to change without notice.

Printed in United States

www.hp.com

*AW549-96009*

Carton contents

• X9720 Network Storage System-specific HP BL460c server blade

Procedure

CAUTION:

When handling system components, there is a danger that

equipment may be damaged by electrostatic discharge (ESD).

Use proper anti-static protection at all times:

• Keep the replacement component in the ESD bag until needed.

• Wear an ESD wrist strap grounded to an unpainted surface

of the enclosure.

• Touch an unpainted surface of the enclosure before handling

the component.

• Never touch the connector pins.

1. If there are already four server blades in the system and any PDUs

are not connected to a power receptacle, you must connect them

now. All PDUs must be powered when there are four or more server

blades in the enclosure.

2. On the front of the blade enclosure, remove the blank from the front

of the next available server blade bay.

3. Prepare the server blade for installation.

Page 1

PAGE 1
HP StorageWorks X9720 Network Storage System Carton contents Server Blade Installation Instructions • X9720 Network Storage System-specific HP BL460c server blade Procedure CAUTION: When handling system components, there is a danger that equipment may be damaged by electrostatic discharge (ESD). Use proper anti-static protection at all times: • Keep the replacement component in the ESD bag until needed. • Wear an ESD wrist strap grounded to an unpainted surface of the enclosure.
PAGE 2
4. Install the server blade. IMPORTANT: For warranty purposes, when reporting an issue to HP, provide the serial number located on the capacity block component. 5. Perform the Quick Restore operation on the newly installed server blade. For instructions, see the HP StorageWorks X9720 Network Storage System Administration Guide. 6. To complete the installation of the new server blade, see the section “Adding new server blades” in the HP StorageWorks X9720 Network Storage System Administration Guide.