HP StorageWorks X9720 Network Storage System Server Blade Installation Instructions (AW549-96009, December 2009)

4. Install the server blade.
5. Perform the Quick Restore operation on the newly installed server
blade. For instructions, see the HP StorageWorks X9720 Network
Storage System Administration Guide.
6. To complete the installation of the new server blade, see the section
“Adding new server blades” in the HP StorageWorks X9720
Network Storage System Administration Guide.
Related information
See the following documents for information about the HP StorageWorks
X9720 Network Storage System:
• http://www.hp.com/go/x9000
• http://www.hp.com
• http://www.hp.com/go/storage
• http://www.hp.com/support/manuals
To locate X9720 Network Storage System documentation, go to http:/
/www.hp.com/go/x9000, and then click the support link.
• HP StorageWorks X9720 Network Storage System Administration
Guide
• HP StorageWorks X9720 Network Storage System Quick Start Guide
• HP StorageWorks X9720 Network Storage System Wiring Diagrams
for Base Cabinet Configurations
• HP StorageWorks X9720 Network Storage System Wiring Diagrams
for Expansion Cabinet Configurations
• HP ProLiant BL460c Server Blade User Guide
HP technical support
For worldwide technical support information, see the HP support website:
http://www.hp.com/support
Before contacting HP, collect the following information:
• Product model names and numbers
• Technical support registration number (if applicable)
• Product serial numbers
• Diagnostic details
• Operating system type and revision level
• Detailed questions
IMPORTANT:
For warranty purposes, when reporting an issue to HP, provide
the serial number located on the capacity block component.
Page 2