6.2 HP IBRIX 9000 Storage Network Best Practices Guide (TA768-96069, December 2012)

After FM migration, FSN 1 has two active interfaces:
• bond0 is the cluster network interface
• bond0:0 is not active; the Fusion Manager could move back to this interface if requested
• bond0:2 is a user network VIF for file serving from FSN 1
• bond0:3 is not active, but is provisioned for failover of file serving duties from FSN 2
After FM migration, FSN 2 has two active interfaces:
• bond0 is the cluster network interface
• bond0:0 is handling requests for the active Fusion Manager
• bond0:2 is a user network VIF for file serving from FSN 2
• bond0:3 is not active, but is provisioned for failover of file serving duties from FSN 1
The ibrix_nic command shows the following after the FM migrates from FSN 1 to FSN 2:
Sample ifconfig output for FSN 1 after migrating the FM from FSN 1 to FSN 2:
FSN failover 11