6.1 HP IBRIX X9000 Network Storage System CLI Reference (TA768-96057, June 2012)

ibrix_phonehome
Manages the Phone Home configuration.
Description
When Phone Home is enabled, you can get remote support for X9000 hardware and software
alerts using standard HP Insight Remote Support protocols. Systems are monitored continuously for
hardware or software failures, and HP can take the necessary corrective measures.
To enable remote support for MSA (X9320 systems), use the ibrix_vs command to register the
MSA.
The chassis in X9720/X9730 systems are registered automatically. Use the ibrix_chassis
command to see the current registrations.
Synopsis
Configure and enable Phone Home:
ibrix_phonehome -c -i <IP Address of the Central Management Server> [-z
Software Entitlement Id] [-r Read Community] [-w Write Community] [-t
System Contact] [-n System Name] [-o System Location]
The command configures and enables Phone Home on all devices (servers, storage, and chassis)
present in the cluster. This command can also be used to modify the existing Phone Home
configuration.
Entitle a server:
ibrix_phonehome -e -h <Host Name> -b <Customer Entered Serial Number>
-g <Customer Entered Product Number>
The server must be present in the cluster. Enter the Host Name parameter exactly as it is listed by
the ibrix_fm -l command.
The customer-entered serial number and product number are used for warranty checks at the HP
Support queue. These numbers are on the information tag attached to the front panel of the
hardware.
Entitle storage (MSA):
ibrix_phonehome -e -i <Management IP Address of the Storage> -b <Customer
Entered Serial Number> -g <Customer Entered Product Number>
This command must be run for each MSA present in the cluster. The customer-entered serial number
and product number are used for warranty checks at the HP Support queue. These numbers are
on the information tag attached to the front panel of the hardware.
Entitle a chassis:
ibrix_phonehome -e -C <OA IP Address of the Chassis> -b <Customer Entered
Serial Number> -g <Customer Entered Product Number>
This command must be run for each chassis present in the cluster. The customer-entered serial
number and product number are used for warranty checks at the HP Support queue. These numbers
are on the information tag attached to the front panel of the hardware.
Unconfigure and disable Phone Home support:
ibrix_phonehome -d
Display the Phone Home configuration:
ibrix_phonehome -l [-p { server | storage | chassis | trapsink |
entitlement } ]
To obtain details about servers, storage, chassis, or trapsinks, use the -p option with the
corresponding keyword. Use the entitlement keyword to obtain statistics about the entitlement.
ibrix_phonehome 115