6.1 HP IBRIX X9000 Network Storage System CLI Reference (TA768-96057, June 2012)

DescriptionOption

Specifies the assigned system name (generally the fully-qualified domain name) of the this

agent.

-n SYSNAME

Specifies the physical location of the MIB-II system being managed (this agent).-o SYSLOCATION

Specifies the port on which the agent listens for SNMP requests from the NMS. The default

port is 5061.

-p PORT

In SNMPv1 and v2, identifies the community name (that is, the password) used for an

SNMP get request. The default read community name is public. Used in SNMPv3 if

non-v3 read requests are allowed.

-r READCOMMUNITY

Indicates whether the agent is listening for SNMP requests on the SNMP port. The default

value is off.

-s on|off

Specifies the text id of a contact person responsible for the agent’s host system.-t SYSCONTACT

Updates an SNMP agent.-u

Indicates the version of the SNMP agent.-v 1|2

In SNMPv1 and v2, identifies the community name (that is, the password) used for an

SNMP set request. No default write community name is set.

-w WRITECOMMUNITY

Shows the usage for this command.-?