6.1 HP IBRIX X9000 Network Storage System CLI Reference (TA768-96057, June 2012)

Options

DescriptionOption

Lists client IP addresses that are allowed access to the share. Use commas to

separate the IP addresses, and enclose the list in quotes (for example,

-A ALLOWCLIENTIPSLIST

ibrix_cifs -A “192.186.0.1,102.186.0.2/16”). The default is "",

which allows all IP addresses.

Describes the share.-D SHAREDESCRIPTION

Lists client IP addresses that are denied access to the share. Use commas to

separate the IP addresses, and enclose the list in quotes (for example,

-E DENYCLIENTIPSLIST

ibrix_cifs -E “192.186.0.1,102.186.0.2/16”). The default is "",

which denies all IP addresses.

Specifies the default mode for newly created files, in the same manner as the

Linux chmod command. The range of values is 0000–0777. The default is

0700.

-F FILEMODE

Lists valid CIFS share settings.-L

Specifies the default mode for newly created directories, in the same manner

as the Linux chmod command. The range of values is 0000–0777. The default

is 0700.

-M DIRMODE

Specifies CIFS settings. Use commas to separate the settings, and enclose the

list in quotation marks (for example, “read only=yes,access based

-S SETTINGLIST

enumeration=true”). To delete a setting, enter "settingname=" with no

value (for example, "read only=").

Adds a CIFS share.-a

Deletes a CIFS share.-d

A file system.–f FSNAME

Specifies the file serving nodes on which the share will be created. Use commas

to separate the node names, and enclose the list in quotes (for example,

“host1,host2”).

-h HOSTLIST

Displays information about CIFS shares.-i

Modifies a share.-m

The path to a shared directory.-p SHAREPATH

The name of a shared directory.-s SHARENAME

Shows the usage for this command.-?