6.1 HP IBRIX X9000 Network Storage System CLI Reference (TA768-96057, June 2012)

ibrix_cifsmonitor
Monitors CIFS services on file serving nodes.
Description
The ibrix_cifsmonitor command configures monitoring for the following CIFS services:
• lwreg
• dcerpc
• eventlog
• lsass
• lwio
• netlogin
• srvsvc
If the monitor finds that a service is not running, it attempts to restart the service. If the service
cannot be restarted, that particular service is not monitored.
Synopsis
Start the CIFS monitoring daemon and enable monitoring:
ibrix_cifsmonitor -m [-h HOSTLIST]
Disable monitoring and stop the CIFS monitoring daemon:
ibrix_cifsmonitor -u [-h FMLIST]
Restart CIFS service monitoring:
ibrix_cifsmonitor -c [-h HOSTLIST]
Display the health status of CIFS services:
ibrix_cifsmonitor -l
The command output reports health status as follows:
ConditionHealth Status
All monitored CIFS services are up and runningUp
The lwio service is running but one or more of the other services are downDegraded
The lwio service is down and one or more of the other services are downDown
Monitoring is disabledNot Monitored
The active Fusion Manager could not communicate with other file serving nodes in the clusterN/A
Options
DescriptionOption
Restarts CIFS service monitoring.-c
Specifies file serving nodes (use commas to separate the node names).-h FMLIST
Displays the health status of CIFS services.-l
Enables monitoring of CIFS services.-m
Disables monitoring of CIFS services.-u
Shows the usage for this command.-?
22 X9000 File Serving Software commands