6.1 HP IBRIX X9000 Network Storage System CLI Reference (TA768-96057, June 2012)

ibrix_cluster

Registers a remote cluster for remote replication.

Description

The source and target clusters of a remote replication configuration must be registered with each

other before remote replication tasks can be created.

Use ibrix_cluster -r on the target cluster to register the source cluster before creating a

remote replication export with ibrix_crr_export. Use ibrix_cluster -r on the source

cluster to register the target cluster before starting a remote replication task with ibrix_crr. It is

necessary to run the command only once per source or target.

Synopsis

ibrix_cluster -r -C CLUSTERNAME -H REMOTE_FM_HOST

For the -H option, enter the name or IP address of the host where the remote cluster's Fusion

Manager is running. For high availability, use the virtual IP address of the Fusion Manager.

Remove the registration of a remote cluster from this cluster:

ibrix_cluster -d -C CLUSTERNAME

List clusters registered with the local cluster:

ibrix_cluster -l

Options

DescriptionOption

Removes the registration of a remote cluster from this cluster.-d

Lists clusters registered with the local cluster.-l

Registers the remote cluster and its Fusion Manager with the local cluster.-r

Name of the target cluster being registered or having its registration removed.-C CLUSTER_NAME

Name or IP address of the host where the Fusion Manager for the target cluster is running

is running. For high availability, use the virtual IP address of the Fusion Manager.

-H REMOTE_FM_HOST

Shows the usage for this command.-?