6.1 HP IBRIX X9000 Network Storage System CLI Reference (TA768-96057, June 2012)

The command can be run on file system FSNAME or optionally only on segment LVNAME. This

phase can be run with a specified block size and an alternate superblock number. For example:

ibrix_fsck -p 1 -f ifs1 -B 4096 -b 12250

NOTE: If phase 1 is run in analytic mode on a mounted file system, false errors can be reported.

Run phase 2:

ibrix_fsck -p 2 -f FSNAME [-s LVNAME] [-c] [-o "options"]

The command can be run on the specified file system or optionally only on segment LVNAME. Use

-o to specify any options.

Run phase 3:

ibrix_fsck -p 3 -f FSNAME [-c]

Switch a segment from unavailable to read-only, or from read-only to unavailable:

ibrix_fsck –w –f FSNAME –s LVNAME {-r | -u}

Options

DescriptionOption

Specifies a block size in KB.-B BLOCKSIZE

Clears the INFSCK flag.-C

Specifies the number of an alternate superblock, generally used only if the normal superblock

is corrupted.

-b ALTSUPERBLOCK

Runs ibrix_fsck in corrective mode (the default is analytical mode).-c

A file system.-f FSNAME

Options for the command.-o "options"

Runs the specified phase (0, 1, 2, or 3).-p 0|1|2|3

Specifies a logical volume (segment) name.-s LVNAME

Switches a segment from unavailable to read-only, or from read-only to unavailable.-w

Shows the usage for this command.-?