6.5 HP StoreAll OS User Guide

NOTE: Even if you delete the container sync configuration at the source cluster, it is also
recommended that you remove the source container's metadata X-Container-SyncTo and
X-Container-Sync-Key, or you may receive error messages in var/log/message.
Deleting container sync using CLI commands
To delete the container sync backup target:
ibrix_objectstoreadmin -d -p IPADDRESSLIST
To delete the container sync backup source:
ibrix_objectstoreadmin -d -s IPADDRESSLIST
Deleting container sync configuration using the HP StoreAll Management Console
1. In the left Navigator pane, select Object under File Shares and Object Store.
2. In the Object Store pane, select the Object Store you want to modify.
3. If you have configured Object Store container sync, you will see a + to the left of the Object
Store title. Expand the Object Store and you will see Object Store Container Sync as a child
of the Object Store.
4. Select Object Store Container Sync.
5. Select the involved share in the top pane and select the backup target you want to delete in
the lower pane.
6. Click Delete Container Sync Config. A confirmation window will come up. Click Yes to perform
the deletion of container sync.
Managing and monitoring Object Store
Viewing your Object Store from the HP StoreAll Management Console
To view a listing of your Object Stores from the HP StoreAll Management Console, select Object
under File Shares and Object Store in the left Navigator pane.
See the HP StoreAll OS CLI Reference Guide for more information about the ibrix_objectstore
-l command for listing Object Stores.
The Object Stores are listed, along with their directory path and file system.
Object Stores can be added and removed by using the Add and Delete buttons on the Object
Store panel.
156 Using Object Store