HP StoreAll OS 6.5.1 Upgrade Guide

2. Run the /opt/hp/platform/bin/hpsp_fmt -fr command to verify that the firmware
on this node and subsequent nodes in this cluster is correct and up-to-date. This command
should be performed before placing the cluster back into service.
The following figure shows an example of the firmware recommendation output and corrective
component upgrade flash:
X9720 and 9730 platforms
8200/8800 and 9300/9320 platforms
IMPORTANT: For some components in StoreAll 8200/8800 and 9320/9300, performing
a firmware update would require some prerequisite measures that must be followed before
the flash operation. The Firmware update command, hpsm_fmt -flashrec -c
<component-name>, provides the prerequisites required and it asks users they have taken
necessary steps for the firmware update.
Upgrade the firmware in the following order:
1. Server
2. Chassis
3. Storage
Steps for upgrading the firmware 53