HP StoreAll OS 6.5.1 Upgrade Guide

3. Do the following based on the Proposed Action and Severity:
Go toStatus in Severity columnStatus in Proposed Action column
Step 3MANDATORYUPGRADE
Step 3 is optional. However, it is
recommended to perform step 3 for
RECOMMENDEDUPGRADE
system stability and to avoid any
known issues.
Step 4MANDATORYNONE or DOWNGRADE
Step 4 is optional. However, it is
recommended to perform step 4 for
RECOMMENDEDNONE or DOWNGRADE
system stability and to avoid any
known issues.
4. Perform the flash operation by entering the following command and then go to step 5:
hpsp_fmt -flash -c <components-name>
The following screen shot displays a successful flash operation.
5. Perform the flash operation by entering the following command and then go to step 5:
hpsp_fmt -flash -c <components-name> --force
6. If the components require a reboot on flash, failover the node for continuous operation as
described in the following steps:
NOTE: Although the following steps are based on a two-node cluster, all steps can be used
in a multiple node clusters.
54 Upgrading firmware