HP StoreAll OS 6.5.1 Upgrade Guide

3. Install the server blade.
4. Install the software on the server blade. The Quick Restore DVD is used for this purpose. See
the section “Recovering the X9720/9730 Storage” in the HP StoreAll 9730/IBRIX X9720
Storage Administrator Guide for more information.
5. Set up failover. For more information, see the HP StoreAll OS User Guide.
6. Enable high availability (automated failover) by running the following command on server 1:
# ibrix_server -m
7. Discover storage on the server blade:
ibrix_pv -a
8. If you made any other customizations to other servers, you may need to apply them to the
newly installed server.
Steps for upgrading the firmware 57