HP StoreAll OS 6.5.1 Upgrade Guide

and after you run the ibrix_reten_adm -u -f FSNAME command. For more
information, see “Upgrading pre–6.1.1 file systems for data retention features” (page 25).
18. If you previously created ibrix_collect add-on scripts in an earlier release, rename the
add-on scripts to match the new version number for StoreAll. After you rename the add-on
script, verify that the script still works since functionality can change from one release to the
next.
19. If you have an Express Query enabled file system prior to version 6.3, manually complete
each file system upgrade as described in “Required steps after the upgrade for Express
Query–enabled file systems” (page 14).
20. If you have an Express Query enabled file system from 6.3, check that Express Query has
been enabled:
ibrix_archiving -l
ibrix_archiving -i
21. The HP StoreAll OS Software 6.5.1 release supports version 6.3.x for StoreAll Windows
clients and versions 6.3.3 and 6.5 for StoreAll Linux clients. If you are already running the
StoreAll Windows 6.3.x clients, no action is required. If you are already running version 6.3.3
on the StoreAll Linux clients, you are not required to upgrade to the 6.5 client, but the 6.5
client upgrade is preferred. If you are running a StoreAll Linux client version earlier than 6.3.3,
you must upgrade, at a minimum, to 6.3.3. However, upgrading to the 6.5 client is strongly
encouraged.
• Linux StoreAll clients. See “Upgrading Linux StoreAll clients” (page 11).
• Windows StoreAll clients. See “Upgrading Windows StoreAll clients” (page 12).
22. Mount file systems on Linux StoreAll clients.
23. If you received a license for a cluster expansion, install it as described in the Administrator
Guide for your platform.
After the upgrade 65