6.0 HP X9720 Network Storage System Administrator Guide (AW549-96034, December 2011)

5. The Verify Configuration window shows the configuration received from the management
console. Select Accept to apply the configuration to the server and register the server with the
management console.
NOTE: If you select Reject, the wizard exits and the shell prompt is displayed. You can restart
the Wizard by entering the command
/usr/local/ibrix/autocfg/bin/menu_ss_wizard or logging in to the server again.
6. If the specified hostname already exists in the cluster (the name was used by the node you
are replacing), the Replace Existing Server window asks whether you want to replace the
existing server with the node you are configuring. When you click Yes, the replacement node
will be registered.
Next, complete the restore on the file serving node.
Completing the restore on a file serving node
1. Ensure that you have root access to the node. The restore process sets the root password to
hpinvent, the factory default.
2. Run the exds_stdiag command from the node that was just restored. You should be able
to see the shared storage, just as you can from the other server blades in the chassis.
3. Disable the microcode_ctl service:
chkconfig microcode_ctl off
Configuring a file serving node 141