HP IBRIX X9730 Performance Module Installation Instructions (QZ730-96001, June 2012)
HP IBRIX X9730 Network
Storage System Performance
Module Installation Instructions
© Copyright 2012 Hewlett-Packard Development Company, L.P.
*QZ730-96001*
Published: May 2012
Edition: 1
Package contents
• Two X9730 Network Storage System server
blades (X9730 PN)
• One X9730 Network Storage System disk
enclosure (X9730 CX)
• Supported cables (power cords, 2.00 m external
mini-SAS cables)
Process
The X9730 Performance Module installation process
consists of:
• Installing the X9730 CX into the rack
• Connecting the new X9730 CX to the SAS
switches
• Installing the X9730 PNs
• Completing X9730 PN and X9730 CX setup and
configuration
The X9730 supports a maximum of eight connected
X9730 CXs. Six X9730 CXs fit in the main rack
(Figure 1 (page 2)); the remaining two X9730 CXs
must be installed in an expansion rack (Figure 2
(page 2)).
NOTE: Add the Performance Modules one at
a time. Installation can be performed while the
X9730 is online.
Page 1