6.3 HP StoreAll Storage Installation Guide (TA768-96085, April 2013)

Select the number of networks and select OK. The Network Configuration screen is
displayed.
Select the interface and then select Continue. Or, to edit the interface, select it and then
select Configure. The Edit Bonded Interface screen is displayed. Edit the interface details
and select OK.
5. The Configuration Summary lists your configuration. Select Commit to continue the installation.
The wizard now sets up the blade based on the information you entered.
6. The setup wizard next configures the chassis on the 9730 system. See the HP StoreAll Storage
Network Best Practices Guide for detailed information about the chassis components. (This
step will fail if the OA IP address has not been set up or if the blade cannot communicate with
the OA.) The Active Virtual Connect is by default the Virtual Connect in interconnect bay 1.
If the system is at factory defaults, the administrator passwords for OA and Virtual Connect
are on the labels affixed to the back of the chassis. If the passwords have been reset, enter
the new passwords.
Installing the first expansion blade 111