6.3 HP StoreAll Storage Installation Guide (TA768-96085, April 2013)

21. The wizard powers off blades 2–16, applies the SAS configuration, and then reboots blade
1. Log into blade 1 when the Linux login prompt appears.
22. The wizard takes the following actions:
• Verifies the SAS configuration to ensure that SAS zoning is set up correctly
• Powers on blades 2–16
• Verifies storage firmware to ensure that is set up correctly
• Validates the LUN layout and configures it if necessary
23. The wizard now forms bond0 from eth0 and eth3.
24. The X9000 Installation - Network Setup Complete screen is displayed. Select Join this IBRIX
server to an existing cluster.
118 Expanding an 9720 or 9320 10GbE cluster by an 9730 module