6.3 HP StoreAll Storage Installation Guide (TA768-96085, April 2013)
10. Select a method to complete the installation:
• Continue with cluster setup at this console (Local web UI session)
• Continue with cluster setup remotely (Remote web UI session)
• Join this IBRIX server to an existing cluster
• Exit Now (You just wanted to setup networking)
If you need to create a cluster, press F2 to use ASCII mode, which opens the "Form a Cluster-
Step 2" screen, described in “Completing the installation in ASCII mode” (page 13).
IMPORTANT: To use the web UI, your cluster network must meet the following conditions:
• Network bond0 was configured without errors.
• Broadcast is enabled. The web UI relies on broadcast network traffic.
• The cluster has a single bond0 unified network for user/cluster traffic. (Using an external
management network for ILO traffic is okay.) The web UI assumes that a bond0 unified
network should be used throughout the cluster.
• You entered a gateway IP address on the Server Setup screen.
If your cluster does not meet these conditions, select ASCII mode to complete the installation.
12 Installing 9300 and 9320 systems