6.3 HP StoreAll Storage Installation Guide (TA768-96085, April 2013)

If the applicable management console is not listed or you select Cancel, the Management
Console IP screen is displayed. Enter the IP address of the management console and select
OK.
26. The wizard registers and starts a passive management console on the blade.
The installation is complete.
Installing the second expansion blade
The installation procedure is similar to the first node, except the firmware, chassis, SAS, and storage
checks are already in place.
1. Log into the second expansion node (slot 4 in our example).
2. Log into the blade in the first expansion slot. The 9730 Setup dialog box is displayed.
120 Expanding an 9720 or 9320 10GbE cluster by an 9730 module