6.3 HP StoreAll Storage Installation Guide (TA768-96085, April 2013)

To proceed with the Getting Started Wizard, do one of the following:
• To continue using the console from which you are working, select Continue with cluster setup
at this console (Local web UI session). A message displays that the management console GUI
will be launched; click OK.
When the browser opens, a message may display that it is an untrusted connection. Select
Add Exception and then select Confirm Security Exception. The login window for the StoreAll
Management Console is displayed.
• To use another laptop or desktop that is connected to the network, select Continue with cluster
setup remotely (Remote web UI session). A message displays that the management console
will connect to the server; click OK. A command prompt opens; enter the login credentials for
the StoreAll Management Console.
See “Configuring the cluster with the Getting Started Wizard” (page 30) for the procedure to
complete the wizard.
Completing the installation in ASCII mode
To configure the first server, complete the following steps:
1. On the Form a Cluster — Step 2 dialog box, enter a name for the cluster and specify the IP
address and netmask for the Management Console IP (also called the Cluster Management
IP). This a virtual IP address (VIF) assigned to the entire cluster for management use. Think of
it as the “IP address of the cluster.” You should connect to this VIF in future GUI management
sessions. The VIF remains highly available.
Also enter the IP addresses and domain for your DNS servers, and the IP addresses for your
NTP servers.
2. The Configuration Summary lists the configuration you have specified. Select Commit to
continue.
Completing the installation in ASCII mode 13