6.3 HP StoreAll Storage Installation Guide (TA768-96085, April 2013)

• The default gateway provides a route between networks. If your default gateway is on a
different subnet than bond0, skip this field.
Later in this procedure, you can select either Web UI or ASCII mode to complete the
installation. A gateway address is required to use the Web UI.
• VLAN capabilities provide hardware support for running multiple logical networks over
the same physical networking hardware. StoreAll supports the ability to associate a VLAN
tag with a FSN interface. For more information, see the HP StoreAll Storage Networking
Best Practices Guide.
• If you press F2, you can toggle between the default Network Configuration dialog box
and the Advanced Networking dialog box.
NOTE: If you see a message reporting that link-down networking issues were detected, select
Proceed.
7. To save the data provided on the Network Configuration screen, click OK.
8. Select the bond mode and then click OK.
Installing the expansion server 133