6.3 HP StoreAll Storage Installation Guide (TA768-96085, April 2013)

11. On the X9000 Installation Complete - Network Setup page, select a method to complete the
installation:
• Use the Getting Started Wizard. This method can be used only if the original 93xx cluster
was configured with StoreAll OS 6.2 using the wizard. The cluster must use the unified
network. Select either Continue with cluster setup on this console (Local web UI session)
or Continue with cluster setup remotely (Remote web UI session).
See “Completing the installation with the Getting Started Wizard” (page 135) for more
information.
• Continue with the installation wizard. This method should be used for all other expansions
as it allows the network on the new server to be configured to match the existing cluster.
See “Completing the installation with the ASCII text wizard” (page 136).
Completing the installation with the Getting Started Wizard
If you selected Continue with cluster setup at this console (local web UI session) or Continue with
cluster setup remotely (remote web UI session) on the X9000 Installation - Network Setup Complete
page of the ASCII text wizard, exit the wizard and complete the following steps:
1. Open the GUI, select Cluster Configuration from the Navigator, and then click Getting Started
from the Summary panel.
2. On the Getting Started Wizard menu, select File Servers. The wizard executes a new server
discovery and specifies the new servers as Not Defined in the Hostname column.
3. Select the first new undefined server and click Configure.
4. On the Configure File Server dialog box, enter the information for the server and click OK.
Completing the installation with the Getting Started Wizard 135