6.3 HP StoreAll Storage Installation Guide (TA768-96085, April 2013)

5. If you want to be able to access the FM through the bond1/user network, create a management

VIF for bond1:

ibrix_fm -c <VIF IP address> -d <VIF device> -n <VIF netmask> -V

For example:

# ibrix_fm -c 10.10.125.101 -d bond1:1 -n 255.255.255.0 -v user

The installation is complete on the first server.

Installing additional servers

1. Complete steps 1-9 in “Starting the installation and configuration” (page 8).

2. When the X9000 Installation - Network Setup Complete window is displayed, select Join this

IBRIX server to an existing cluster.

3. Do one of the following:

• If the management console is listed on the Join Cluster screen, select it and then select

OK.

• If the management console is not listed, select Cancel. The Management Console IP page

appears. Enter the IP address of the management console and select OK.

The wizard registers and configures a passive management console (Fusion Manager) on the

server.

Completing the installation in ASCII mode 15