6.3 HP StoreAll Storage Installation Guide (TA768-96085, April 2013)

3. A configuration script now performs some tuning, imports the LUNs into the StoreAll OS
software, and sets up HA. When the script is complete, you can install the remaining blades
as described in the next section.
Installing additional 9730 blades
Use this procedure to install blades 2–16 on an 9730 system. Complete the following procedure
on each blade:
1. Log into the blade.
2. The 9730 Setup dialog box is displayed.
3. The wizard verifies the firmware on the system and notifies you if a firmware update is needed.
62 Installing 9730 systems