6.3 HP StoreAll Storage Installation Guide (TA768-96085, April 2013)

5 Post-installation tasks

Updating license keys

Typically you need a license key for each server. If you did not update your license keys during

the installation, download the license keys and install them as described in the administrator guide

for your system.

Configuring and Enabling High Availability

9730 systems

The installation process configures and enables the servers for High Availability.

9300/9320 systems

The network VIFs in the cluster should be configured in backup pairs. To do this, assign standby

backup nodes for the bond0:1 interface. For example, node1 is the backup for node2, and

node2 is the backup for node1. Complete these steps:

1. Identify the VIF:

# ibrix_nic –a -n bond0:2 –h node1,node2

2. Set up a standby server for each VIF:

# ibrix_nic –b –H node1/bond0:1,node2/bond0:2

# ibrix_nic –b –H node2/bond0:1,node1/bond0:2

To enable HA on the cluster, run the following command on the server hosting the active Fusion

Manager:

ibrix_server –m

NOTE: The example shows bond0, which is correct for the unified network. If you are using

separate cluster and user networks, specify bond1.

Using the management console GUI

The GUI is a browser-based interface to the StoreAll management console.

If you are using HTTP to access the GUI, navigate to the following location, specifying port 80:

http://<management_console_IP>:80/fusion

If you are using HTTPS, navigate to the following location, specifying port 443:

https://<management_console_IP>:443/fusion

You can open multiple GUI windows to monitor the effect of configuration changes on cluster status.

Changing the GUI user password

The default GUI user is ibrix and the default password is ibrix. The default root password is

hpinvent and should be changed for security purposes. The passwords can be changed with

the Linux passwd command. Run the command on each node and enter the new password when

prompted:

# passwd ibrix

StoreAll OS software manpages

StoreAll OS software provides manpages for most StoreAll OS software commands. To view the

manpages, set the MANPATH variable on the management console to include the path to the

Updating license keys 71