6.3 HP StoreAll Storage Installation Guide (TA768-96085, April 2013)

5. Insert the USB key into the server to be installed.
6. Restart the server to boot from the USB key. (Press F11 and use option 3 ).
7. When the HP Storage screen appears, enter qr to install the software.
Repeat steps 3–7 on each server and then go to “Starting the installation and configuration”
(page 8).
Starting the installation and configuration
Complete the following steps:
1. Boot the servers that will be in the cluster and log into the first server as root.
The X9000 Installation — Welcome window is displayed.
2. Click Begin.
3. Provide the host name in the Individual Server Setup screen. The installation detects the system
time settings.
4. While setting the time zone, press Enter and the time zone is listed in a separate window.
Type the first letter of your time zone and then use the “UP” and “DOWN” arrow keys to find
your time zone.
8 Installing 9300 and 9320 systems