6.3 HP StoreAll Storage Installation Guide (TA768-96085, April 2013)

7. When the HP Storage screen appears, enter qr to install the software.
8. Repeat steps 4 through 7 on each server.
Installing the first expansion blade
The examples in this procedure show the installation of the first performance module, adding new
blades to an existing 9730 cluster with two blades. Additional performance modules are installed
in the same manner. The following screen shows the cluster before the expansion blades are added.
To install the first blade in the expansion module, complete these steps:
1. Log into the blade in the first expansion slot. The 9730 Setup dialog box is displayed.
2. The setup wizard verifies the firmware on the system and notifies you if a firmware update is
needed.
92 Completing the 9730 Performance Module installation