6.3 HP StoreAll Storage Installation Guide (TA768-96085, April 2013)

10. The wizard registers and starts a passive management console on the blade.
11. The blade is now registered with the active management console and a passive management
console is installed and registered on the blade.
12. The GUI now shows the blade has been added to the cluster.
Installing the second expansion blade
The installation procedure is similar to the first node, except the firmware, chassis, SAS, and storage
checks are already in place.
1. Log into the second expansion node (slot 4 in our example).
2. Log into the blade in the first expansion slot. The 9730 Setup dialog box is displayed.
3. The setup wizard verifies the firmware on the system and notifies you if a firmware update is
needed.
98 Completing the 9730 Performance Module installation