HP Storage Platform Firmware Management Tool for StoreAll User Guide

Example 6 Discover the active firmware version of 8800 server components

# hpsp_fmt -d server

Based on the configuration, FW discovery may take 5 minutes.

<<< Completed >>>

Single component

To discover the active firmware version of a single component, use the option –c <component

name> along with the –d option as follows:

# hpsp_fmt –d –c <component name>

The possible component name can be the short form of components shown in the -lc command

output. See the section “Listing supported components” (page 20). The example output shows the

short form on the left-hand side and its description on the right-hand side.

NOTE: The same short form is used for the device field/column of all operations.

Example 7 Discover the active firmware version of a single component

# hpsp_fmt –d –c PCIeNIC

Based on the configuration, FW discovery may take 5 minutes.

<<< Completed >>>

-------------------------------------------------------------------------------------------------------------

Device Device ID Active FW Version Device Information Parent Device ID

-------------------------------------------------------------------------------------------------------------

PCIeNIC N/A 3.29 NC365T N/A

-------------------------------------------------------------------------------------------------------------

Set of components

To discover the active firmware version of a set of components, use the –c option with

comma-separated component names as the option parameter, along with the –d subcommand as

follows:

# hpsp_fmt –d –c <component name>[,<component name>]…

Discovering the active firmware versions 23