HP Storage Platform Firmware Management Tool for StoreAll User Guide

Example 11 Firmware recommendation for an 8800 storage controller firmware update
# hpsp_fmt -fr -c Storage_Ctlr
Set of components
To get the firmware recommendation for a set of components, use the –c option with
comma-separated component names as the option parameter, along with the –fr subcommand
as follows:
# hpsp_fmt –fr –c <component name>[,<component name>]…
Example 12 Get the firmware update recommendation for a set of components
# hpsp_fmt -fr -c ILO4,BIOS,Storage_Ctlr,Enclosure_IO_Mod
Based on the configuration, Flash recommendation may take 19 minutes.
<<< Completed >>>
Updating firmware
Syntax
The complete syntax for the firmware update command is:
# hpsp_fmt --flash [--force] <server|storage|chassis|--component
<component name> {[,<component name>…]|[<device Id>]}> [--ignorerole]
[--reboot] [--scriptmode] }
Use the --force option to downgrade or rewrite the FW components. You can also replace
--flash with -f.
Description
Update the firmware for a component category, a single component, or a set of components:
• To update a single component:
#hpsp_fmt -f -c <component name>
• To update a set of components:
#hpsp_fmt -f -c <component name> [,component name]...
• To update all components of a category:
#hpsp_fmt -f -c <category-name>
26 StoreAll 8800 and 8200 FMT command reference and examples